Adown Sensor Probe Carbon Monoxide Tester With Relay Output And Modbus AIA-1 manufacturer from China Tongdy Control Technology Co., Ltd

Adown Sensor Probe Carbon Monoxide Tester With Relay Output And Modbus

Place of Origin:

Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: AIA-1

Specification

<table border="1" cellpadding="

Specification

Sensors
Gas Sensor	Electrochemical carbon monoxide sensor
Sensor lifetime	Typically more than 3 years, replaceable
Warm up time	60 minutes (for the first time use)
Response Time	Within 60 seconds
Signal Update	1s
CO Measuring Range	0~100ppm(default)/0~200ppm/0~500ppm selectable
Accuracy	<1ppm+5%reading
Stability	±5% (over 900 days)
Temperature & Humidity Sensor (optional)	Temperature	Relative Humidity
Sensing element:	Band-gap-senor	Capacitive humidity sensor
Measuring range	-10~60	0 -100%RH
Accuracy	±0.5 (20~40)	±4.0%RH (25, 15%-85%RH)
Display resolution	0.1	0.1%RH
Stability	±0.1 per year	±1%RH per year

Outputs
LCD Display (optional)	Display real time CO measurement or CO+ temperature& humidity measurements
Analog Output	1X010VDC or 4~20mA linear output for CO measurement
Analog Output Resolution	16Bit
Relay dry contact Output	Up to two dry-contact outputs Max, switching current 3A (230VAC/30VDC), resistance Load
RS485 communication interface	Optional Modbus RTU protocol with 19200bps(default), Or BACnet MS/TP protocol with 38400bps(default)

Electrical and General Items
Power Supply	24VAC/VDC
Power Consumption	2.8W
Wiring Standard	Wire section area<1.5mm²
Working Condition	-10~60(14~140); 5~99%RH, non condensing
Storage Conditions	-10~60(14~140)/ 5~99%RH, non condensing
Net Weight	260g
Manufacturing Process	ISO 9001 Certified
Housing and IP class	PC/ABS fireproof plastic material, protection class: IP30
Compliance	CE-EMC Approval

Features

Design for real-time detection air carbon monoxide.
High accuracy humidity and temperature detection optional
LCD display carbon monoxide and optional temperature & RH measurement.
Smart buttons for easy operation
Excellent electrochemical CO sensor with more than 3 years lift time in typical use
CO sensor is replaced
Provide 1X analog linear output (0~10VDC/4~20mA selectable) for the measurement
Providing up to two dry contact outputs which are controller the setpoint
RS485 Modbus /BACnet interface optional
24VAC/VDC power supply
CE-Approval

Typical Application

In undergroung parking lots and garages to detect CO and control ventilators
In offices and public places to detect and control CO concentration
In BAS to detect CO concentration
For all ventilation control systems

Model guide

TKG- CO- 1 X Y Z C - R–TH/T

1: wall mounted with the external sensor in an adown probe

X: analog output
0: no analog output
1: 1x0~10VDC linear output(default)
2: 1X4~20mA linear output (default)
3: 1X0~10VDC output and can be switch to 4~20mA (just for only one analog output)

Y: relay dry contact output
0: no dry contact output
1: 1xdry contact output
2: 2xdry contact outputs

Z: Communication interface
0: no communication interface
1: Modbus RS485
9: BACnet communication

C: 24VDC/VAC power supply

R: co range
001: 0~100ppm (default)
002: 0~200ppm
005: 0~500ppm

-TH(option) temperature & RH detection and display
No TH indicates without Temp & RH detection and display
T- Temp detection and display
NL option- No LCD display, only for CO detect without relay output

For example: TKG-CO-1101-001-TH indicates the CO detector with 1X0~10VDC linear output and Modbus interface. CO range:0~100ppm. It has temperature and humidity detection and display.

Demmensions & Mounting

Wiring diagram

Pictures