Hydroponics Co2 Controller Relay And Modbus Rs485 And Zigbee Wireless Communication AIA-1 manufacturer from China Tongdy Control Technology Co., Ltd

Hydroponics Co2 Controller Relay And Modbus Rs485 And Zigbee Wireless Communication

Place of Origin:

Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: AIA-1

Specifications <td sty

Specifications

CO₂ Sensor	Non-Dispersive Infrared Detector (NDIR)
Measurement Range	02,000ppm (default) 05,000ppm (preset)
Accuracy	±60ppm + 3% of reading @22(72)
Stability	<2% of full scale over the life of the sensor
Calibration	Self-calibration system
Response Time	<5 minutes for 90% step change at low duct speed
Non-linearity	<1% of full scale @22(72)
Duct Air Velocity	0~450m/min
Pressure Dependence	0.135% of reading per mm Hg
Warm up time	2 hours (first time) 2 minutes (operation)
Split CO2 sensor	2 meter cable connection between the senor and the controller
Temperature & Humidity Detection&Display (optional)	Temperature	Relative Humidity
Sensing element:	Band-gap-senor	Capacitive humidity sensor
Measuring range	-20~60	0 -100%RH
Accuracy	±0.5 (20~40)	±4.5%RH (25, 15%-85%RH)
Display resolution	0.1	0.1%RH
Stability	±0.1per year	±1%RH per year
General Data
Power supply	24VAC/24VDC or 100VAC~240VAC
Consumption	1.8 W max. ; 1.0 W avg.
LCD display	Display CO₂measurement or CO₂ + temperature& humidity measurements
Dry contact output (optional)	1xdry contact output for CO₂ Max. 5A (100~240VAC/30VDC)rated switch contact
Plug& play type	Just for 100VAC~240VAC power supply with European or American power plug and power connector to the CO2 generator
Modbus RS485 Interface (optional)	19200bps, 15KV antistatic protection.
Wireless module (optional)	ZigBee 2.4G short distance wireless communication
Operation conditions	0~50(32~122); 0~99%RH, non condensing
Storage conditions	0~60(32~140)/ 0~80%RH
IP class	IP30
Standard Approval	CE-Approval

Features

Special used to real-time detect CO₂ level in air ducts.
NDIR infrared CO₂ sensor inside with Self-Calibration and up to 15 years lifetime
High accuracy humidity and temperature detection &display optional
With LCD or without LCD selectable
Providing one dry contact output with presetting the setpoint
Modbus RS485 communication interface optional
Wireless of ZigBee protocol optional
Smart structure with easier wire connection through the external pipe
Provide four types: wall mounted, duct mounted, split and plug & play
For plug & play type, special design a photosensor inside to detect day/night and change the working mode of the CO2 generator
For duct probe type, special the 180° rotatable fastness position of the probe can be used in two directions of air flow.
Replaceable filter in the probe and extendable probe length
Design the convenient and easier buttons for operation

Typical Applications

In office and residence areas to detect CO2 level
Ventilation control
In BAS to detect the CO2 and the data transmittance
For greenhouse and plant bin
For CO2 laboratory

Demensions & Mounting

Models Guide
TKG- CO2- A 0 C D Y –TH-PPX

A:the sensor installation type
     1: wall mounted with the external adown probe sensor
     2: probe duct mounted
     3: split sensor with 2 meters cable connection
     4: probe duct type with extended probe (209mm)

C:relay dry contact output
     0: no dry contact output
     1: 1xdry contact output

D:Modbus interface
     0: no communication
     1: Modbus RS485 interface
     2: with ZigBee wireless module (will be provided in the future)

Y:power supply
     C: 24VDC/VAC power supply
     D: 100~240VAC power supply

-TH temperature & RH detection and display

-PPX Plug and play for wall mounting type
      No “PP” indicates without plug & play installation
      PPE means European standard plug
      PPA means American standard plug

Wiring Diagram