Gas detected

Carbon Dioxide (CO₂)

Sensing element

Non-Dispersive Infrared Detector (NDIR)

Accuracy@25(77),2000ppm

±40ppm + 3% reading

Stability

<2% of FS over life of sensor (15 yr typical)

Calibration interval

ABC Logic Self Calibration System

Response time

<2 minutes for 90% step change

Warm up time

2 hours (first time)

2 minutes (operation)

CO₂ measuring range

02,000ppm (default)

05,000ppm available

CO2 Sensor life

More than 10 years

Power supply

24VAC/24VDC

Consumption

1.5 W max. ; 0.8 W avg.

Analog output

0~10VDC or 2~10VDC selectable by the jumper

Output select

PID control output or Linear output for CO2 measurement selectable via jumpers

Minimum opening

2V default and can be preset via RS485

Setpoints

Provide 4 CO2 setpoints for PID control:

CO2≥ 600ppm; CO2≥800ppm; CO2≥1000ppm(default); CO2≥1200ppm;

Selected by jumpers

Modbus interface

Modbus RS485 interface, 19200bps, 15KV antistatic protection.

6 LED lights

From left to right:

Green/Green/Yellow/Yellow/Red/Red

1^st green light on as CO2 measurement≤600ppm

1^st and 2^nd green lights on as CO2 measurement>600ppm and≤800ppm

1^st yellow light on as CO2 measurement>800ppm and≤1,200ppm

1^st and 2^nd yellow lights on as CO2 measurement>1,200ppm and≤1,400ppm

1^st red light on as CO2 measurement>1,400ppm and≤1,600ppm

1^st and 2^nd red lights on as CO2 measurement>1,600ppm

Operation conditions

0~50(32~122); 0~95%RH, non condensing

Storage conditions

0~60(32~140)/0~80%RH

Net weight

180g

Dimensions

100mm×80mm×28mm

Installation standard

65mm×65mm or 2”×4”wire box

Approval

CE-Approval

Type

Model

Description

   CO2 PID      Controller   

F2000TSM-CO2-S100-PID-02/05

1Xanalog output with PID (linear output selectable), CO2 range: 0~2,000ppm/0~5,000ppm

F2000TSM-CO2-S101-PID-02/05

1Xanalog output with PID (linear output selectable), Modbus interface.

CO2 range: 0~2,000ppm/0~5,000ppm

F2000TSM-CO2-L100-PID-02/05

6 LED lights indicates CO2 ranges.

1Xanalog output with PID (linear output selectable), CO2 range: 0~2,000ppm/0~5,000ppm

F2000TSM-CO2-L101-PID-02/05

6 LED lights indicates CO2 ranges.

1Xanalog output with PID (linear output selectable), Modbus interface.

CO2 range: 0~2,000ppm/0~5,000ppm