Carbon Monoxide And Gas Detector For Underground AIA-1 manufacturer from China Tongdy Control Technology Co., Ltd

Carbon Monoxide And Gas Detector For Underground

Place of Origin:

Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: AIA-1

Specifications <table border="1"

Specifications

Sensors
Gas Sensor	Electrochemical carbon monoxide sensor
Sensor lifetime	Typically more than 3 years, replaceable
Warm up time	60 minutes (for the first time use)
Response Time	Within 60 seconds
Signal Update	1s
CO Measuring Range	0~100ppm(default)/0~200ppm/0~500ppm selectable
Accuracy	<1ppm+5%reading
Stability	±5% (over 900 days)

Temperature & Humidity Sensor (optional)	Temperature	Relative Humidity
Sensing element:	Band-gap-senor	Capacitive humidity sensor
Measuring range	-10~60	0 -100%RH
Accuracy	±0.5 (20~40)	±4.0%RH (25, 15%-85%RH)
Display resolution	0.1	0.1%RH
Stability	±0.1 per year	±1%RH per year

Outputs
LCD Display (optional)	Display real time CO measurement or CO+ temperature& humidity measurements
Analog Output	1X010VDC or 4~20mA linear output for CO measurement
Analog Output Resolution	16Bit
Relay dry contact Output	Up to two dry-contact outputs Max, switching current 3A (230VAC/30VDC), resistance Load
RS485 communication interface	Optional Modbus RTU protocol with 19200bps(default), Or BACnet MS/TP protocol with 38400bps(default)

Electrical and General Items
Power Supply	24VAC/VDC
Power Consumption	2.8W
Wiring Standard	Wire section area<1.5mm²
Working Condition	-10~60(14~140); 5~99%RH, non condensing
Storage Conditions	-10~60(14~140)/ 5~99%RH, non condensing
Net Weight	260g
Manufacturing Process	ISO 9001 Certified
Housing and IP class	PC/ABS fireproof plastic material, protection class: IP30
Compliance	CE-EMC Approval

Description

1. Design for real-time detection air carbon monoxide.
2. High accuracy humidity and temperature detection optional
3. LCD display carbon monoxide and optional temperature & RH measurement.
4. Smart buttons for easy operation
5. Excellent electrochemical CO sensor with more than 5 years life time
6. Replaceable CO sensor
7. Provide 1X analog linear output (0~10VDC/4~20mA selectable) for the measurement
8. Providing up to two dry contact outputs with presetting the setpoint
9. Modbus RS485 communication interface optional
10. Provide two easy methods for calibration and setup alarm points by end users: infrared remote controller or a software via RS485
11. 24VAC/VDC power supply
12. CE-Approval

Applications

a. In office and residence areas to detect CO level
b. In underground parking lots and garages
c. In BAS to detect the CO and the data transmittance
d. For greenhouse and plant bin
e. For ventilation control system

Mounting and Dimensions

Wiring Diagram

Models Guide

TKG- CO- 1 X Y Z C - TH-R

1: wall mounted with the external sensor in an adown probe

X: analog output
          0: no analog output
          1: 1x0~10VDC linear output(default)
          2: 1X4~20mA linear output (default)
          3: 1X0~10VDC output and can be switch to 4~20mA (just for only one analog output)
          4: 1x0~5VDC linear output (default)

Y: relay dry contact output
        0: no dry contact output
1: 1xdry contact output
2: 2xdry contact outputs

Z: communication interface
        0: no communication
        1: Modbus RS485 interface
         9: Bacnet MS/TP interface

C: 24VDC/VAC power supply

-NL(option) No LCD display, only for the transmitter which only has one analog linear output.

-TH(option) temperature & RH detection and display
No –TH indicates without temperature & RH detection and display

R: CO range
     005: 0~500ppm (default)
    001: 0~100ppm
   002: 0~200ppm

For example: TKG-CO-1101C-TH-001 indicates the CO detector with 1X0~10VDC linear output and Modbus interface. CO range:0~100ppm. It has temperature and humidity detection and display.

Picture