CO Controller / Industrial Carbon Monoxide Detector For CO Level in home use AIA-1 manufacturer from China Tongdy Control Technology Co., Ltd

Place of Origin:

Guangdong, China (Mainland)

Product Detail

Model No.: AIA-1

Specifications

<t

Specifications

Gas Detected	Carbon monoxide
Sensing Element	Semiconductor gas-sensitive component
Temperature Sensor	NTC 5K
Humidity Sensor	HS series capacitive sensor
Power Supply	24VAC/VDC
Power Consumption	2.8W
Response Time	<5 minutes for 90% step change
Signal Update	1s
Warm up Time	36 hours (first time) 10 minutes (normal operation)
CO Measuring Range	0~500ppm
Display Resolution	1ppm
CO Setting Resolution	1ppm (Minimum)
Temperature Measuring Range	0~70(32~158)
Fire Alarm	65(149)
Humidity Measuring Range	0 ~ 99% RH
Analog Output	010VDC linearized output or PID control output, programmable selection
Output Resolution	10Bit
Relay Output	Two dry-contact outputs of relay. One is for the ventilation control, and another is for the second CO alarm. Rated switching current 2A (220VAC/30VDC), resistance Load
Communication Interface	RS-485, 9600,14400,19200(default), 28800,38400 bps (programmable), 15KV antistatic protection, 3 independent base address, max network node 128
Operating Temperature	070 (32158)
Operating Humidity	095%RH, non condensing
Storage Conditions	-4070 (-40158)
Net Weight	260g( 24VAC) 300g(110VAC/220VAC)
Dimensions	120mm×90mm×24mm for 24VAC/DVC power supply 120mm×90mm×24mm+28.5mm bulge for 220VAC/110VAC power supply
Installation Standard	65mm×65mm or 2”×4” wire box
Interface Connection (Max)	10 terminals
Wiring Standard	Wire section area<1.5mm²
Manufacturing Process	ISO 9001 Certified
Programming and Selection	Via internal DIP and external push-buttons

Features

Real time monitoring carbon monoxide level with range from 0 to 500ppm
Semiconductor sensor with 5 years long lifetime
LCD can display CO, temperature and humidity,
Provide up to 010V analog output and 2 relay dry contact outputs
Two alternatives for the analog output: linearized over full range output or PID control output
Preset the first and the second alarm levels for measured carbon monoxide with a buzzer alarm
RS–485 communication interface, 15 KV antistatic protection, independent address setup

Application

Carbon monoxide is a deleterious gas with colorless and odorless character , which could be absorbed by lung quickly, the speed rate of combination of CO and hemoglobin more than 250 times with oxygen, then stops oxygen circulation around the body; which have big character of heavy toxicity, so CO poisoning have became a big problem around the world.
F2000IAQ-CO is used to monitor room CO level and temperature as well as relative humidity. With one 0~10VDC analog output and two dry-contact of relay outputs, F2000IAQ-CO can be as a programmable logical controller to direct control a ventilation system, and also as a transmitter of CO level to connect with a DDC/PLC.
F2000IAQ-CO can provide RS-485 communication interface to connect it with a PC or another control system, so make each room ventilation system be managed and controlled intelligently. It’s as a prevent monitor of CO potential leak and a controller of ventilation system in bellows application.
Human environment, Industrial environment
Underground parking lot, maintenance garage
Freezing machine room and other places where air quality is easy to worsen

Buttons and LCD